Fast setup of Grandstream ATA with Mitel

 

MiVoice / 3300 setup.

Add new extension.

Device Type: Generic SIP Phone. 

On the Access and Auth tab set the Sip Password.

HT801.

Connect analog phone to ATA.

Dial *** and then 02 to get IP address.

Open the ATA web interface with admin/admin.

Set these options on the FXS Port tab.

Primary SIP Server: 1.2.3.4

SIP User ID: 1001 (Mitel extension)

Authenticate Password:

Update

Apply

Go to Status page and check port status.

Mitel MiCollab or NuPoint database export

ssh root@10.11.12.13
(admin password)

sudo -u postgres psql -p 5444 -d NuPoint -c "copy np.np_mbox_id to '/tmp/mboxid.csv' with (format csv,header)"

exit

scp root@10.11.12.13:/tmp/mboxid.csv .

Contents of csv:

Get the current session count of a Fortigate policy with Zabbix.

VPN setup between Fortinet and Meraki - Part 2

Fortigate CLI on 5.6.12

config vpn ipsec phase1-interface
edit meraki1
        set interface "port1"
        set keylife 28800
        set peertype any
        set proposal 3des-sha1
        set dpd disable
        set dhgrp 2
        set nattraversal disable
        set remote-gw 64.65.66.67
        set psksecret
end

config vpn ipsec phase2-interface
edit meraki1
        set phase1name meraki1
        set proposal aes256-sha1
        set pfs disable
        set keylifeseconds 28800
        set src-subnet 10.111.0.0 255.255.255.0
        set dst-subnet 10.222.0.0 255.255.255.0
end

config router static
edit 0
      set dst 10.222.0.0 255.255.0.0
      set device meraki1
end

Fortigate SNMP to get sessions with specific IP address

I have a need to keep a count of sessions from the Internet to a specific IP address.

snmpwalk -c mycommunity 10.1.2.3 1.3.6.1.4.1.12356.101.11.2.1.1.5 | grep 64.65.66.67 | wc

This one liner does the trick for now. 64.65.66.67 is the destination IP address on my network.

***

The example below will list all the session on the Fortigate and took about two minutes to complete with 1628 sessions.

snmpwalk -c mycommunity 10.1.2.3 1.3.6.1.4.1.12356.101.11.2.1.1.5

SNMPv2-SMI::enterprises.12356.101.11.2.1.1.5.1624 = IpAddress: 10.1.2.3

SNMPv2-SMI::enterprises.12356.101.11.2.1.1.5.1625 = IpAddress: 10.1.3.1

SNMPv2-SMI::enterprises.12356.101.11.2.1.1.5.1626 = IpAddress: 10.1.4.2

SNMPv2-SMI::enterprises.12356.101.11.2.1.1.5.1627 = IpAddress: 10.1.5.5

SNMPv2-SMI::enterprises.12356.101.11.2.1.1.5.1628 = IpAddress: 199.232.32.21

Quick command line to list AD accounts with email address.

dsquery * -filter "&(objectclass=User)(objectcategory=Person)" -limit 0 -attr name mail